Menu
Call (609) 991-0383
Chimney Parts

Chase Cover Replacement Beach Haven, NJ

A chimney sweep in Beach Haven can replace the metal cover on top of a framed chimney chase sized to the chase and shaped to shed water off the edges. Dial (609) 991-0383 to talk with a local chimney pro about your chase.

If your chimney is covered in siding instead of brick, it is probably a chase built around a metal flue. The chase cover, sometimes called a chase top or chase pan, is the metal sheet that caps the top of that enclosure. Its job is to keep water out of the framing and away from the fireplace below.

Builder grade chase covers are usually galvanized steel cut flat across the top. Flat covers hold standing water, and galvanized steel rusts once the coating wears, which leaves brown streaks down the siding and eventually holes in the pan. Rust stains on the siding are often the first visible sign of a failing cover.

A leaking chase cover lets water soak the framing, insulation and fireplace below. Over time it leads to rot in the framing, rust on the fireplace and mold in damp areas. Catching a bad cover early keeps the repair simple.

Depending on what the sweep finds, chase cover replacement in Beach Haven, NJ can go hand in hand with chimney cap installation and chimney leak repair.

Looking for Beach Haven chase cover replacement? Call (609) 991-0383 to talk to a local chimney sweep.

Call now
The process

How chase cover replacement works

Replacing a chase cover is mostly about getting the fit right.

  1. Look for damage

    The chase is inspected from the roof for rust, holes and soft framing. Damage below the cover may need repair before the new cover goes on.

  2. Take measurements

    Exact measurements are taken so the new cover fits snugly. Most replacement covers are made to order.

  3. Remove the old cover

    The cap and old cover are removed carefully so the flue pipe is not disturbed. This is the best time to look for rot.

  4. Fit the new top

    The new cover is set in place with its skirt over the siding and a hem that kicks water off the edge. It is fastened through the skirt, not through the top.

  5. Seal the collar

    A sealed storm collar and cap close up the opening at the flue. The sweep makes sure water has nowhere to get in.

What is included

Chase cover options

Chimney caps

The collar around the flue pipe is sealed, and the cap is replaced if it is worn for a complete watertight top.

Skirt hems

Drip edges stop water from running down the siding which protects trim and siding.

Cross break designs

A sloped or cross broken top keeps water from pooling and keep the cover drier.

Copper chase covers

A copper chase top adds a finished look and resists corrosion that weathers to a natural color.

Stainless covers

Stainless steel is the most common replacement material and do not leave rust streaks.

Related service

Chimney Chase Repair Beach Haven, NJ

Chase repair goes hand in hand with replacing a cover that has been leaking. Rotted studs, soft plywood, damaged siding and soaked insulation are the usual problems. The framed chase also needs proper flashing where it meets the roof.

If you are in Beach Haven, tell the sweep about any water stains, soft siding or rust inside the fireplace when you call (609) 991-0383. Bigger framing repairs may involve a carpenter, while the cover and cap are handled by the sweep. Rot under the cover needs attention before the new cover goes on.

Local help

Chase Cover Replacement Near Me

Chase covers in Beach Haven face every kind of weather the year brings, from summer storms to winter snow. In Beach Haven and places nearby like Tuckerton, Beach Haven West, Mystic Island and Ocean Acres, snow and rain sitting on flat chase tops speed up rust, and a sloped stainless or copper cover usually ends the problem.

Need chase cover replacement around Beach Haven? Call (609) 991-0383 for a Beach Haven chimney sweep who serves the towns around it too.

Chimneys in this climate

Winters here are long and cold, and the heating season usually runs from October well into April. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Beach Haven, NJ schedule a sweep in early fall, and a repair check after a hard winter.

Why call

Why not wait

Safer fires

A chimney problem fixed early rarely spreads to the masonry, the liner or the house.

Local knowledge

Local sweeps see the same chimney types and weather wear across Beach Haven and nearby towns.

Know what happens next

Ask your questions before you agree to anything.

Chase Cover Replacement FAQ

Can a leaking chase cover be repaired?
Patching a rusted chase cover is usually a short term fix. Replacing it with a sloped stainless or copper cover is the more lasting fix. Ask the sweep to check the framing under the cover too.
How long will a new chase cover hold up?
A stainless steel or copper chase cover can last for decades. Good design keeps water off the cover and the siding. Have it checked during chimney sweeping.
Can water from a chase cover damage my fireplace?
A failed chase cover is one of the most common causes of water in a factory-built fireplace. Over time, it can rust the metal firebox and flue and damage panels. Replacing the cover and storm collar usually stops it.
Why is my chase cover rusting?
Many original chase covers are made of galvanized steel, which rusts once its protective coating wears away. Flat covers make it worse, since standing water sits on the metal. Those streaks are a sign the cover needs replacing.
What does a chase cover do?
The chase cover is the metal sheet that seals the top of a chimney chase, with an opening for the flue pipe. It keeps rain and snow out of the chase, which protects the framing and the fireplace below. A cap sits on top of the flue pipe that comes through the cover.

More questions? Call (609) 991-0383

Other services that may help

  • Chimney Cap Installation

    Putting a sturdy cap on top of the chimney so water, birds and debris stay out of the flue.

    Learn more
  • Chimney Leak Repair

    Finding and stopping water that gets in through the crown, cap, flashing or brick, whether the drip shows up in the attic, the ceiling or the firebox.

    Learn more
  • Chimney Waterproofing

    Waterproofing masonry chimneys with vapor-permeable repellents, not paint, to slow freeze-thaw damage and spalling.

    Learn more
  • Chimney Repair

    Chimney repairs from the cap and crown down to the firebox, so the chimney stays dry and safe to use.

    Learn more

Looking for something else?

See all chimney services

Need chase cover replacement in Beach Haven, NJ?

Call (609) 991-0383 for a local chimney sweep in Beach Haven and nearby towns.

(609) 991-0383

Free to call. No forms to fill out.

Call (609) 991-0383